LED hosepipe clip 9.5mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A clip with which you can mount an LED tube
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 13
- Wydruki
- 1
- Wyświetlenia
- 53
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
A clip with which you can mount an LED tube.
Who hasn't experienced it?
You want to mount an LED tube on the wall or under a cupboard or somewhere else.
The included adhesive strips never stick anyway.
So I created a clip to securely fix the LED tube.
Clip Dimensions:
Width over all: 12mm
Length over all: 30mm
Height over all: 12 mm
Clip height: 10mm
Clip width: 12mm
Clip diameter: 9.5mm
3D printer: Creality K1C
Filament: Sunlu PLA+ White 1.75mm
Print Settings:
Layer: 0.20mm
Nozzle temperature: 230 °C
Bed temperature first 3 layers: 70 °C
Bed temperature all other layers: 60 °C
Print Time:
1 Piece: 5:04 Min.
15 Pieces: 38:04 Min.
If you need multiple units, you can simply duplicate them
You need double-sided adhesive Foam tape to mount on the surface.
I use the following:
Sanjotape Premium PE-Foam Tape
Art. No. 3204
EAN 7350092581189
https://www.amazon.de/Sanojtape-Doppelseitiges-Klebeband-Schaumstoff-Montageband/dp/B06XH2MKFH/ref=sr_1_1?__mk_de_DE=ÅMÅŽÕÑ&crid=31J6D7NC6S1UA&dib=eyJ 2IjoiMSJ9.yZzF1Ajra4licP6SmP0mZQ.LtiKt32gnERxpT-bbGbnBdtdlxPS6kHPg9cTaoC9E9U&dib_t ag=se&keywords=7350092581189&qid=1737900951&sprefix=7350092581189%2Caps%2C60&sr=8-1