AAA Battery Case for Sonoff SNZB03 or other Tuya Motion Sensor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
AAA Battery Case for Sonoff SNZB03 or other Tuya Motion Sensor
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 409
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
Battery Case for Sonoff Tuya Motion Sensor
I have created a custom case designed to hold two AAA batteries, specifically tailored for the Sonoff-SNZB03 or other Tuya motion sensor. You can choose between two options for installation:
Using a CR2450 Dummy:
Insert a CR2450 dummy into the sensor's battery slot and secure it with hot glue. This method ensures that the sensor remains untouched and can easily be reverted to its original configuration.
By using the CR2450 dummy, you preserve the device’s integrity, making it easy to return to its original state if needed.
Direct Soldering:
Alternatively, you can solder the AAA batteries directly to the device. This is a more permanent solution but may slightly modify the device.
The outer terminal serves as the positive connection (+), where the red wire should be soldered. The inner terminal is the negative connection (-), where the black wire is soldered.
I used this battery holders
https://www.amazon.de/dp/B0C2Q5VXWD?ref=ppx_yo2ov_dt_b_fed_asin_title
In the picture, you can see the 3D-printed case, with the Sonoff SNZB-03 in the bottom right corner and the round one on top being a Tuya sensor from AliExpress for 2-3 euros. This way, you can save money on CR2450 batteries.