ComMarker Fibre Laser Spare Lens box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a box to store two spare laser lenses for the ComMarker B4 30W Fibre Laser
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 331
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Used the Parametric box design from Whity to make a storage box for two spare lenses for the ComMarker B4 Fibre Laser.
I've found that when I bought a spare lens they included the threaded insert with the lens but when I take out the fitted lens the threaded insert stays in the laser so the mounting positions in the box are too big for the lens without the threaded insert so I need to make the mount smaller or print an insert for one lens socket.
I added a reducer ring, print this and glue it in if you have a lens without the threaded reducer.
I added a couple of peices of thick loom tape around the hole to make it a tight fit for the lens and also will add some 10mm foam inside the top of the lid to keep the lenses from rattling around.