Makera Carvera Air 3.175mm Collar Guide
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
8mm x 12mm guide to use in the bit collar installation tool for 3.175mm end mills
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 102
- Wydruki
- 4
- Wyświetlenia
- 519
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
I made this simple cylinder guide to use in the Makera bit collar installer. Mine did not come with spacers/sleeves for a 3.175mm (1/8") milling bit, so when I would put one of the collars on with the tool it would sometimes be a bit crooked on it because it was not pushing it in straight. This printed guide fixed that problem for me.
Drop one of the bit collars into the end cap, then put the printed guide in, slide your bit in until it won't go any further, then screw the installer together as normal and thread in until you are done.
You may need to tweak some of your print settings to get it to fit perfectly. The size in this file made it fit perfectly with my X1C.