Prusa i3MK2 fusion model
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
individual parts put in fusion360 for visualization Still more to do.. it has some nuts, and screws but no washers, …
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 65
- Wydruki
- 0
- Wyświetlenia
- 427
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Our favorite machine- in its earlier incarnation… revisualized and brought into the matrix allowing the playing with the model, and rebuilding it in virtual space, adding to further understanding of the beauty of the design.
Buy PRUSA, there is no substitute for the original! https://www.prusa3d.com I
i have yet to put the nuts, washers and screws into the parts. I still have other hardware to add , but is a good beginning. I made a rambo board, if you look in the rambo case… though it is only a beginning
i might even try to render the wiring harnesses … just maybe
Update: additional models added 10 JAN 22 added servo/actuators modeled a rambo board,
added screws and u bolts with nuts to y chassis and prusa 2.5 with new rambo case
and Now you can print the printer @ 45% size as I added the gcode … but beware- there are no supports and this printer won't print or print. But say you do print the printer…THEN POST THE MAKE!