1 / 3
Babytooth 2S battery holder 'Flywoo style' — zdjęcie 1
1 / 3

Babytooth 2S battery holder 'Flywoo style'

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

2S battery holder (base plate) for Babytooth, based on the Flywoo system

Ocena
0 / 5
Polubienia
3
Pobrania
8
Wydruki
0
Wyświetlenia
89
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial

I like the way that Flywoo designed the battery holders for their Baby Nano and Flylens products. When I built a “Babytooth” toothpick drone, I wanted to re-use the 2S battery holder from the Baby Nano. In order to do so, I created this bottom plate for the Babytooth.

The part can be used with any of Flywoo's original battery holders, or you can print your own. 

  • Filament: PLA or similar, do NOT use TPU for this bottom plate.
  • Needs support
  • Use short M2's straight into the PLA or with short plastic nuts
  • Make sure the slot is perpendicular to the camera direction (unless you want to mount your battery ‘toilet tank’ style

Tagi