Anycubic Vyper Filament-Sensor Holder for Direct Drive Configuration (FreeCAD)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Enhanced "Vyper Filament Sensor Holder with tension stabilizer" https://www.thingiverse.com/thing:5151737 for DDE
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 115
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
Someone enhanced the "Vyper Filament Sensor Holder with tension stabilizer" https://www.thingiverse.com/thing:5151737 ("old") by adding a filament support block at the outlet side of the holder - but I can't find his work to reference this remix correctly. For identification purposes I put his STL here into the remix under the name "Original.stl".
I enhanced the original model by building a new, bigger inlet funnel, smoothing the connections between old-part and block-part and inserting a printable M6 thread into the outlet to directly screw in a PC4-M6 tube coupler. At last I added a planar face for the frontmost screw, which is holding the filament sensor.
I printed the model of Eryone PLA+ black, 0,2mm LH and a 0,4mm nozzle. I had to redo the M6 thread with a screw tap, then a PC4-M6 tube coupler could be installed. After removing the Anycubic extruder and its stepper, the filament-sensor holder together with the filament-sensor can be installed and the PTFE-tube can be attached.