Solder Sponge Tray for (Aixun) Soldering Iron Handle Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A tray for a 55x55mm cleaning sponge to be mounted on the M4 Thread on the Smart Soldering Sation Handle Holder.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 140
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
My Aixun soldering station came with a smart iron holder that has your run of the mill brass sponge in the front for cleaning your soldering iron tips.
For me this did not cut it for cleaning so I designed a tray to hold a 55mm x 55mm soldering tip cleaning sponge. I went with this one. Though you can easily cut other sponges to size.
For mounting it to the side youll need an M4x25 socket head screw.
The mounting point features two alignment teeth that grab inside the teeth on the iron holder to keep the tray from rotating once installed. You will have to tighten the screw rather tight for it to sit properly, just stop once you hear cracking :)
I have provided presliced files for the MK4S. Print with at least 10% infill to provide enough strength to the mountig point.
One of the sliced files has some small adhesion helper circles placed at the corners of the part to prevent the part from lifting while printing, the other one is just the part.
A .STEP file for remixing is also available.