Mini Monster Truck Tire Ramp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easy monster truck ramp using spare RC tires
- Ocena
- 0 / 5
- Polubienia
- 38
- Pobrania
- 173
- Wydruki
- 0
- Wyświetlenia
- 1248
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
I wanted an RC ramp for my Losi Mini-LMT, Traxxas TRX4MT, FMS Smasher, and Redcat Lawless - and I wanted to use some leftover crawler tires to add some fun to it.
Two files attached.
1st is for 4.75" crawler tires - and uses the whole tire. Honestly - this is REALLY big for these small-scale monster trucks. The mini-LMT does a backflip off them rather easily.
2nd is for 4.19" crawler tires - and uses HALF the tire. I simply cut the tire down the middle and put them in. This ramp is much better as an actual ramp and hitting the tires is quite fun.
I printed both of these in PLA, with 3% infill, on my Elegoo Neptune 4 Plus.
The ramps are both around 300mmx300mm.
Yes - you can shrink these down in your slicer to fit a smaller print bed - you will just need to use smaller tires or a smaller section of tires to make them fit.
Happy Printing!