Universal Mount for Sofirn SC31 Pro
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A universal mount for the Sofirn SC31 Pro torch, for use with cable ties or M4 screws. Two versions available.
- Ocena
- 5 / 5
- Polubienia
- 24
- Pobrania
- 98
- Wydruki
- 1
- Wyświetlenia
- 737
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
A friend of mine wanted to mount his Sofirn SC31 Pro in his car and asked me to knock up something simple he could use with cable ties. This is it. I made two versions for different mounting options (vertical/horizontal), both are in the files section.
The SC31 Pro pops into the holder covering most of the torch's central knurled section and maintains quite a good grip. I imagine it will wear and loosen over time, but hopefully this will just make it easier to remove the torch whilst the mount still has a good grip on it.
Use cable ties or M4 screws to secure this to your desired surface.
I printed at ~0.2 with a 20-30% infill but you may want to run it a bit finer and do a better job than my printer did. I printed it with the back to the bed for no supports/mess, but this may cause a weakness along the Z axis so consider printing it on it's side.
Example printed with 3DQF Midnight Silver PLA.