Basket Weave Clay Stamps
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Weave interlocking patterns with nine sizes of clay stamping balls.
- Ocena
- 0 / 5
- Polubienia
- 29
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 281
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution
These clay stamps churns out endless seamless woven patterns as you roll them with your hand. I've generated nine versions, graduating from 40 to 200 points in 20-point increments. The point count indicates the detail of the pattern.
The stamps are 80mm (3.14 inches, like pi) in diameter. You can resize them to suit your application. The piping in the patterns is 3mm in diameter, which should leave a good impression. Print small – 2.5" diameter – to make a fine bouncy cat toy.
I've printed the pattern in PETG with 25% infill. I enabled PLA organic supports but used a support blocker to limit supports to the bottom half of the model. The top prints fine without supports. Prints great on Prusa XL.
Check out my other clay stamp models in this Clay/Pottery Stamps Collection.
Created in Rhino 3D with Grasshopper.