Gibralter now Architectural Mailbox brand mailbox flag replacement parts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modifications to fix minor artifacts and missing features from original
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 58
- Wydruki
- 0
- Wyświetlenia
- 192
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
Someone was distributing flyers in our neighborhood, and was inserting them between the flag and the mailbox, rather than delivering to my door. In my case, they pulled the flag off the mailbox, and I was not able to find all the parts on the ground or in the street.
Home Depot sells a flag replacment kit, but jmynheir modeled the parts accurately, but a couple artifacts ended up in his STL files, so I have correct them and uploaded here. I also added a set of washers that you may need, in 4 thicknesses, pick the one that fits best (prob 2 mm thick). I also creased the thickness of the flag, when I printed from PETG, I felt it need to be a little thicker and less bendable. I added an alternative to the pin which locks the bracket in place, more like the pin included in the Home Depot kit.
I ended printing the final washers from TPU, and the rest of the parts from ASA, due to its much superior UV resistance. I recommend printing the bracket with 5 or more walls and 25% infill.
My thanks to jmynheir for the original design.