GEN2 Modular Drawer Cases - Increased Joint Tolerances
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
GEN2 Drawer cases with tighter tolerances on the sliding mechanism
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 181
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
I found that the tolerances in the standard files resulted in a very loose fit with lots of play for my printer. To solve this I expanded the male end of the dovetail joints on the cases. 0.2mm expansion worked best for my setup (Bambu P1S using PETG). A 0.3mm expansion would result in 0 clearance, so I've uploaded clearances from 0.05-0.25mm.
The test print includes samples of all clearances so you can see which works best for your printer/material/slicer settings. Since there's not much material to work with, I did not emboss any labeling on the joints. The objects are arranged in ascending size. I recommend removing the female ends from the plate and leaving the male ends on the plate so they don't get mixed up. Once you've identified the best fitment, just use the corresponding models.