Makelangelo 5 - Wall hanging Plotter - Gondola with geared penlift
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my personal Version of the gondola for the awesome wall hanging plotter from Dan @ http://www.makelangelo.com
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 172
- Wydruki
- 0
- Wyświetlenia
- 1721
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Public Domain
This is just a different approach to a Gondola for a Polargraph robot.
My main goal was to get the pen up and down to a smooth linear motion and make it easy to change colors.
You need:
2 x 6806-2RS Bearrings (30x42x7mm)
1 x mg90 servo
300g Fishing lead bullets
3 x small rubberbands
some small wood screws for fixing pens into the holders
I printed it in standard PLA, 0.2mm Layerheight several times.
Assembly is straightforward (see photo)
The small containers are filled with 100g of fishing lead bullets and then sealed with hotglue
Mounting the gear onto the Servo:
- use a standard servo horn and shape it to fit into the gear and glue together
Check out the work of Dan @ marginallyclever.com and marginmakelangelo.com and get your machine in his shop.
Latest Update 19.01.2022:
- Changed weight and weightclamps for better fitting
- added GT2belt mounting for Gondola weight
- added mounting Hooks for Machine (2Parts for stronger prints)