Blast Gate Ball Valve with flange and stop
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a modification of the blast gate ball valve with a mount for a micro switch. Also includes a built in flange.
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 81
- Wydruki
- 0
- Wyświetlenia
- 874
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This remake adds a mount for a magnetic microswitch, a lever modification with a mount for the magnet, and a flange to interface with a 100mm/4" PVC pipe.
Included is a copy of the case without the flange.
Also a flange adapter to put on the case without the flange.
To make a full blast gate you need from Peter's original:
- rotator
- both lugs
- 1 case for the bottom
With the modified top case and the lever in this model.
Updated model to include the magnetic threaded hose coupler. I cannot find the original I used - I did not make the model, nor do I claim ownership. If/when I find the oringial I will post a link.