Sigma fp right side grip + thumb grip + strap connector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a small grip + thumb grip + strap connector designed to fit the right side of the Sigma fp
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 71
- Wydruki
- 0
- Wyświetlenia
- 294
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a small grip + thumb grip + strap connector designed to fit the right side of the Sigma fp. It's designed to line up with the bottom edge of the screen to continue that shape forward, and extends the existing thumb grip shape further out for more bite.
It includes top and bottom right strap connection points.
I add some fuzzy skin in the slicer to make it feel nicer to hold.
I've tested it with these screws: https://www.mcmaster.com/92220A181/
and there is an image attached with the specifications, since that's about as big as it can fit in terms of head width and height.
Just get a 1/4 20 screw that is about 1/4" long, with a head no wider than 0.375".
⚠ Disclaimer! Use at your own risk!
I have been using 3d printed tripod plates + strap connectors for years with no problems, but ultimately the safety of your gear is up to you, and I take no responsibility for any damages caused if your copy of this design breaks or does not work with your gear.
I would not recommend carrying the camera by this with heavy lenses - though with very heavy lenses you should probably not carry it by the body anyway.