Front door for IKEA LACK enclosure

Printable door with tool organizer / door pocket options for your Ikea LACK enclosure. 

Since my printer with IKEA Lack enclosure is in our living room, I wanted to make it a little tidy look. This door adds a little furniture-like touch on it, and also works as a practical organizer.

The door has 436 mm wide and 420mm height. I use 28mm height connector (https://www.prusaprinters.org/prints/105530-ikea-lack-table-connector-for-enclosure-h28mm) to stack one LACK table above another, means the total height of a compartment is approx 428mm, 4mm clearance on both each top and bottom sides.

The door itself consists of 4 panels. the size of each panel is 218 x 210mm, fits on i3mk3 bed. I printed mine in Prusa PLA Galaxy Black on texture sheet, the front face down. You may want to ensure your first layer calibration before the large size print ;)

Those 4 panels can be assembled by ”X-clip”, using a need nose pliers as shown in the picture.

Other than printing parts, you will need some components. 

• Hinge: https://www.amazon.de/gp/product/B07C9DPTJ4/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&th=1
• Push open door catch: https://www.amazon.de/gp/product/B07TS2LMHS/ref=ppx_yo_dt_b_asin_image_o02_s00?ie=UTF8&psc=1
• Tapping screw 3.5 x 16 or similar

The inner side of the door has 4 “slots“  and 3 of them are identical size. You may attach tool organizer or pocket, or maybe a trash bin. I will post those options separately.

Update 11.05.2022

I posted options for this doo such as pocket or tool holders

https://www.printables.com/model/145723-tool-holder-pocket-trash-bin-for-front-door-for-ik