1 / 1
Grandpa UP Valentine Love Heart Balloons Carl Fredricksen — zdjęcie 1

Grandpa UP Valentine Love Heart Balloons Carl Fredricksen

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Grandpa UP Valentine Love Heart Balloons Carl Fredricksen

Ocena
0 / 5
Polubienia
562
Pobrania
1516
Wydruki
1
Wyświetlenia
8149
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Grandpa UP Valentine Love Heart Balloons Carl Fredricksen

For best results and minimal layer lines, use a fine layer height (around 0.1–0.12 mm) and slower print speeds to capture small details—particularly in the face and hair. PLA or PETG both work well; PLA is often easier for beginners. Consider adding supports under the chin and arms. Infill at 10–15% is generally enough for a solid result without excessive material use. Once printed, lightly sand any rough edges and, if desired, prime and paint to complete the Funko-style finish. Of course, everyone’s setup is different—feel free to experiment with settings for your preferred balance of print time and surface quality!

Tagi