Reloading die box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Since Short Action Customs is too cheap to give you a plastic box with a 700USD die set, I decided to print my own.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 90
- Wydruki
- 0
- Wyświetlenia
- 611
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
Reloading die box with magnets to close. The box is designed in the style of Redding boxes and its the same size as Redding boxes. Fits 3 reloading dies and some accesories. Holes are specifically designed to fit bullet seating stems from short action customs. The design comes with two top covers, one with SAC logo and one without.
For assembly, you need 8 6(wide)x3(tall)mm magnets, which you glue in with super glue.
No supports needed for printing. I printed with PETG but most materials should work.
Use the multiple extruder in the slicer trick to get two colors on the first layer. The top lid version with the text is a multipart STL, so you can split it to parts in the slicer.