1 / 2
Lego Senna McLaren MP4/4 (#10330) Horizontal Wall Mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A horizontal wall mount for the Lego Senna McLaren MP4/4
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 59
- Wydruki
- 1
- Wyświetlenia
- 948
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (12)Powiązane
A horizontal wall mount for your Lego Senna McLaren MP4/4 (#10330).
Lego Side piece attaches where the original stand attaches (remove the flat white 4x2 piece).
Once attached and Wall Side piece is mounted, just slide it into the notch.
Tight tolerances are required for proper fitment.
I used a #6 screw and dry wall anchor since that is what I had laying around.
But here are the actual dimensions for the screw hole:
- Recess diameter: 14mm
- Recess Depth: 5.95mm
- Inner hole diameter: 4.5mm
No supports are needed.