Replacement Deep 6 Diver
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement Deep 6 Diver
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 317
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a replacement for a size 2 deep six diver. My last one broke and they are very hard to find in local stores so I reverse engineered it and put the printed one together with all the hardware from the broken one, except the rear swivel where I used a split ring instead of the soldered ring.
The hole for the top locking bracket and the hole for the weights are slightly undersize so you can drill them to fit the fastener of your choice. I print with 4 walls to make sure there's still meat left after drilling, but the change to hole size is very minimal. I used a 3/16 pop rivet for the locking bracket and a M5 bolt/nut for the weights.
Be sure to check out my profile for more of my designs.
Commercial licenses for selling physical prints of my designs are available via my MakerWorld page.