1 / 4
REMIX - DIY Print Bed Filament Dryer (80mm PC case fan)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remodeled in Fusion 360 to enable use with an 80mm fan
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 22
- Wydruki
- 1
- Wyświetlenia
- 169
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
Use a brim or raft - very prone to warping! Mine warped even in PLA
I scaled up to 100.8% in X and Y (your mileage may vary)
100% infill in PLA
Annealed in the oven at 200c for 1.5 hr (buried in table salt to prevent warping)