1 / 5
Centering and Off-Center Jigs for Eccentric Wood Lathe Turning
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These jigs mount into a wood lathe chuck to turn off-center pendants.
- Ocena
- 0 / 5
- Polubienia
- 29
- Pobrania
- 126
- Wydruki
- 0
- Wyświetlenia
- 560
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (7)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (62)Powiązane
Use the jigs to mount wood blanks in a lathe chuck. One jig centers the blank, the other jigs allow for off-center turning. The blanks should be 1.5" to 1.6" diameter made with a 1.75" hole saw, and are used to create wooden pendants.