1 / 3

YASLS Simple Lego Sorter

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Yet Annother Simple Lego Sorter. Simple strainer for light objects.

Aktualizacja u źródła: 6 kwi 2023

Informacje o modelu

I use PLA, nozzle 0.4, layerhight 0.3. No support needed. But i guess anything goes :)

You need one box and make a square 100*100mm opening in the bottom, mount the sliders parrallell to the opening.

I used blind rivet to fasten the sliders, but you can use m3-4 screw and nut.

Now it is time to start sorting. A god start is to use the one with 40mm holes and work your way down to 10mm.

There are 4 types of hole diameter in the included strainer.

Ottio = 80mm

Fortio = 40mm

Tjugo = 20mm

Tio = 10mm

If you want to adapt this solution then you kan start by downloading *.f3d file and make your own version in fusion 360.