1 / 1
Toyota FZJ80 Door Clip Repair Tab
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a thin tab that can be glued to a damaged door panel and allow new clips to engage and hold securely.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 190
- Wydruki
- 0
- Wyświetlenia
- 729
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (23)Powiązane
It is common for older door panels to rip when trying to remove them. This tab was simply printed out of PLA and glued onto the panel with super glue. For best results, push the torn out pieces of wood back into place to make it as flat as possible. Add the super glue to the printed part and spray accelerator (not necessary) onto the MDF panel. Then push the key down and hold it in place (with gloves) until the glue cures. Slide the retaining clip into the hole and you're done!
