80cm Stargate Wormhole LED Support
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These models are used to support the wormhole LEDs in the 80cm Stargate by Martin and the LED modifications by Spradlinb
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 68
- Wydruki
- 1
- Wyświetlenia
- 766
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
20250102 Update: uploaded a connecter and 2 mm spacer which are used to give the ring more support when these are attached to a wall.
The models are designed to be attached to the wall and allow LEDs to be hot-glued to the fuzzy surface created using PRUSA Slicer and not have them be hot glued to the back of the Stargate. You will need to print 11 of the complete supports and one with the gap (made by using PRUSA Slicer to create negative space). The gap allows wires to be fed from the bottom of the Stargate into the wormhole LED support ring.
4 LEDs are place on each piece, for a total of 48. The model has gaps to allow wires connecting each LED to laid behind the fuzzy support wall when the LEDs are hot glued.
One print with the larger gap allows for the wires to be fed from the stargate through to the LED support.
Special Thanks to Martin for a wonderful 80cm Stargate model and Spradlinb for the modifications to include LEDs and Sound. If you are looking for specific LED's used, please see Spradlinb Chevron Modification description.