AmongUs on presta valve cup
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
normal presta valve cup. so when you print it you can put in into your bike, car or another tire with presta cup. (:
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 334
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
You should print it on quality from 0.08mm to 0.16 layer hight (you can also print on 0.2mm if you want).
if you are printing it with 0.4mm nozzle let it be as it is, but if you chose smaller one for example 0.2mm nozzle you should set your scale to 95. Smaller nozzle's are more accurate.
Infill set to really high number as 100%, because its small mechanic print. in my case with 100% infill it weight 1g (0.48m) and was printing 24mins.
I printed it with Pet-G, but PLA would also work.
Add supports.