1 / 3
Customizable Snap Case (Small Storage Box)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small case to hold things you might not have a case for, It prints in place ready for use. I hope its useful to you.
- Ocena
- 4 / 5
- Polubienia
- 18
- Pobrania
- 86
- Wydruki
- 1
- Wyświetlenia
- 762
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (7)Wydruki i komentarze (Wydruki: 1) (Komentarze: 2)Remiksy (0)Kolekcje (25)Powiązane
I used this small case to hold some rubber rings my wife and I have. This small case works really well to store small things specifically. It snaps into place and has a small tab to open again.
Hope this is useful to you. If you modify or print please leave a make or feedback :)
Drew some inspiration from the great designs of:
https://www.prusaprinters.org/prints/16175-daily-lenses-small-box
and
https://www.thingiverse.com/thing:384919
Recommendations/ Instructions:
- No need for brim, but if it helps you then feel free to use one.
- NO SUPPORTS. It wont hurt it, it just doesn't need it.
- Would recommend using PETG. However, the PLA print holds up just fine.
- If the dividers do not show up! Select “Detect thin walls” on your Print Settings. Setting already selected on my 3mf files.
- Follow video to edit the Fusion 360 file using my parameters.