RackPi - 10in 2U mount for RPI
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Custom rack for 4 Raspberry Pi 4s with PoE HATs, SSDs, fans, OLEDs, and sliding slots. Perfect for a Kubernetes cluster!
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 63
- Wydruki
- 0
- Wyświetlenia
- 1407
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a custom-designed 3D-printed rack mount built for a lightweight Kubernetes cluster using four Raspberry Pi 4s. Designed to fit perfectly in a 10-inch rack and occupying only 2U of rack space, this solution is compact, efficient, and ideal for homelab enthusiasts.
Each Raspberry Pi is equipped with:
- 2.5” SSDs connected via USB for fast and reliable storage.
- PoE HATs to deliver power efficiently through Ethernet.
- Small 5V cooling fans to keep temperatures in check.
- 0.96” OLED screens displaying key metrics like IP address, CPU/RAM usage, and temperature.
The rack features sliding slots for each Raspberry Pi, enabling easy access for swapping or maintenance without disrupting the entire setup. This modular design keeps everything organized and tidy while maximizing space in your rack.
All components are connected to a Zyxel PoE+ switch, which powers the devices and provides network connectivity, ensuring a seamless and efficient setup.
This cluster runs K3s, a lightweight Kubernetes distribution perfect for testing deployments, scaling applications, and learning DevOps practices. Whether you're building a Kubernetes lab or exploring edge computing, this setup is both practical and visually appealing—tailor-made for compact rack systems
I printed mine with standard profile for PETG (Wanhao) on a bambulab P1P at 15% infull with tree supports. Make sure to remove the supports for the 2.5" SSD cage.
For the rackplate, I printed them at 50% infull with 5 walls also with Wanhao PETG. Please make sur you use compliant infill to reduce horizontal bending. I used Gyroid but Honeycomb would also work I think.
----------------------------------------------------------------------------------------------------------------