Spiderbeam HD 12m Pole Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter for mounting a Spiderbeam HD 12m pole to a 42mm steel mast
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 54
- Wydruki
- 0
- Wyświetlenia
- 461
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This adapter allows the bottom tube of a Spiderbeam HD 12m fiberglass mast, which has an outer diameter of 55mm, to be attached to a 42mm steel mast.
When you mount two or more of these adapters, they automatically align with the two masts, resulting in a perfectly straight assembly. A total of four stainless steel hose clamps are required per adapter: two to attach the adapter to the steel mast and two more to prevent it from moving up or down. A rubber strip should be placed under the latter to prevent damage to the fiberglass mast. This can easily be done by cutting a bicycle tube into appropriately long strips.
I printed the adapters in PETG with an infill of 40%. Only time will tell whether this was a good idea.