1 / 5
Dummy 13 on the ski slope stand. Dummy 13 na stoku narciarskim — zdjęcie 1
1 / 5

Dummy 13 on the ski slope stand. Dummy 13 na stoku narciarskim

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Dummy 13 statuette for a skier. Statuetka Dummy 13 dla narciarza.

Ocena
0 / 5
Polubienia
26
Pobrania
66
Wydruki
0
Wyświetlenia
515
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A statuette for a skiing enthusiast using a Dummy 13 figure and a stand by soozafone. Skis, poles and goggles are from SturdW: https://www.printables.com/model/769586-skis-poles-goggles-for-dummy-13. The files for printing are for a figure enlarged to 120%. Just reduce the scale to 80% in Slicer and a standard Dummy 13 will fit. The ski run is printed separately and glued - the best "grooming" effects are given by printing on a flat surface. The arrow must be pressed into the pole and glued together to the hole in the ski run. Have fun!

Statuetka dla miłośnika narciarstwa z wykorzystaniem figurki Dummy 13 oraz stojaka by soozafone. Narty, kijki i gogle pochdzą od SturdW: https://www.printables.com/model/769586-skis-poles-goggles-for-dummy-13. Pliki do druku mają zastosowanie dla figurki powięszonej do 120%. Wystarczy w Slicerze zmniejszyć skalę do 80% i standardowy Dummy 13 będzie pasował. Trasa narciarska jest druowana osobna i przyklejona - najlepsze efekty "ratrakowania" daje wydruk na płaskiej powierzchni. Strzałkę trzeba wcisnąć w słup i razem przykleić do otworu w trasie narciarskiej. Udanej zabawy!

Tagi