Greenbay Packers Beercoaster (for single extruder)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Beercoaster with Packers Logo and Box
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 118
- Wydruki
- 0
- Wyświetlenia
- 593
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple coaster with logo.
The gaps are 0,15 mm so they should fit with a good tuned printer. You can print the parts with 0,1 to 0,2 mm layerheight. The inlay parts should be printet without brim and glued into the coaster with superglue or else.
I also tried to coat the logo with clear printing resin which worked realy good as a nice finish. It also makes the surface waterproof for easy cleaning (if there happens a little spill during the playoffs ;-)
The box should fit up to 7 coaster (only 6 if you coat them with resin)
Please give me feedback and show off your prints!
Happy Printing!!!