Beacon RevH Front Mount - Qidi Plus 4 (WIP)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a front mount designed to mount the Beacon RevH to the Qidi Plus 4. X-offset: 0 Y-offset: -19mm
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 93
- Wydruki
- 0
- Wyświetlenia
- 1278
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
1/28/2025 - Slight modification - updated model to v1.1
1/31/2025 - Moved back to WIP - even printing in PA6-GF I am seeing slight droop
Overview
This remix is based on Spooknik's Catpgrapher front mount. It is designed for the Beacon probe. Specifically, the RevH Low Profile. It is designed to flip the mounting position 180 degrees.
X-offset: 0
Y-offset: -19
The OEM front cover will work with the Low Profile Beacon RevH, however, I do not reccommend it. The wiring is a little stressed where it goes back into the cover and the pressure from the wire and cover push on the mount creating an ever so slight skew to the angle of the Beacon to the bed…
You may want to print a new cover or route the wiring outside of the cover. Personally I will be looking for a different cover design or making my own.
For the other variation of the Beacon Mount (Regular), I am almost certain you will not be able to route the wires inside of the cover…
Hardware
- 2 M3 x 6 mm or 8 mm BHSCS
- 2 Square or Hex M3 nuts