1 / 4
Miniature Girl/Student/Tourist for your Diorama — zdjęcie 1
1 / 4

Miniature Girl/Student/Tourist for your Diorama

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Orientacyjna cena wydruku pliku

0,93 € – 1,14 € netto (bez VAT)

Dla pliku: girl-tourist_0.4n_0.1mm_PLA_MINIIS_1h28m.bgcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 1,03 € netto (środek widełek).

Masa podana przez autora
4 g
Czas druku podany przez autora
1,46 godz.
Materiał u źródła
PLA
Materiał wyceny
PLA
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

Miniature girl for your diorama, architectural miniature or as a figurine.

Ocena
5 / 5
Polubienia
59
Pobrania
673
Wydruki
2
Wyświetlenia
1839
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — NoDerivatives

Miniature girl for your diorama, architectural miniature or as a figurine.

Woman | Girl | Student | Tourist | Architectural figurines | People | Model

Girl with long hair wearing jacket, pants with pockets, hiking boots and backpack. She is suitable for 3D models of nature, autumn city or as a tourist.

Printable for the most common scales (with girl height 160 cm): 

  • 1/12 scale: 133.3 mm
  • 1/24 scale: 66.7 mm
  • 1/35 scale: 45.7 mm
  • 1/48 scale: 33.3 mm
  • 1/50 scale: 32.0 mm

Print with tree supports. Be very careful when removing them, especially around the ankles. I reinforced her ankles a bit for extra safety, so don’t you dare laugh at her for having thick ankles. 😁

PLA and lowest layer height recommended for high detail.

⚠ The model does not stand alone. If you are not going to glue it into your diorama, print the base. For example my organic base.

 I look forward to your comments and photos of your creative projects.

Have a happy printing time 💛

Tagi