1 / 3
Din Rail mount for Adafruit PiCowbell Screw terminal board. — zdjęcie 1
1 / 3

Din Rail mount for Adafruit PiCowbell Screw terminal board.

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A board to mount the Adafruit PiCowbell Screw terminal board for a Raspberry Pi Pico to a din rail. The mount includes…

Ocena
0 / 5
Polubienia
2
Pobrania
13
Wydruki
0
Wyświetlenia
136
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial

A board to mount the Adafruit PiCowbell Screw terminal board for a Raspberry Pi Pico to a din rail. The mount includes an area on each side for zip ties to attach wires to the board and a small area to attach other breakout boards. The mounting screws are 3mm.

The board can be found at: https://www.adafruit.com/product/5907

You will need to print one tab for this design.

It can be found at: https://www.thingiverse.com/thing:3401942 or https://www.prusaprinters.org/prints/8512-din-rail-mounting-tab.

Category: Electronics

Tagi