Fractal Terra Carrying Handle

A detachable carrying handle for the Fractal Terra. Other designs I found either required purchasing extra materials just to make the handle or weren't very easily removable. While this does require at least the straps, you could get away with just those and forego the buckles or foam.

My cat likes to sleep on my case while it's on and leaving a handle on permanently would rob her of that. 

There are 3 files:

• A Top mount that is designed to hold the handle, but also serves as a replacement bottom piece. Has inset hexagonal inlays to hold the M4 nut. My images on this post use 2 of these
• Bottom Piece (will need to print 2 if using them)
• A handle

In addition to the printed parts, you'll need:

• 2 ~12mm M4 bolts and accompanying nuts. The handle has deep holes added to get away with using shorter screws
• At least a few feet in straps if not also using some kind of buckle to make this a quick release. I used these
• Optionally, but recommended: 2mm thick EVA foam for padding when pressed against the case. This is what I bought
• Optionally, but highly encouraged: some basic thread and needle to sew one end of the strap onto itself so there's no chance of it sliding loose over time.
  • You can vaguely see this in my second image. The top portions of each strap are sewn in so they can't come loose while the bottom is loose to enable tightening of the strap after buckling

The lips on both the Top (when used a bottom) and Bottom pieces should be just short enough you can slide them under the pc for a cool “quick reload” style attachment. I've found that my printer really made these finicky though, so YMMV.