Servo arm for Rancher 4x4, radio controlled, STLs by 3dsets.com
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
0,22 € – 0,27 € netto (bez VAT)
Dla pliku: servo_arm_15v3_02mm_pla_mk3.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 0,25 € netto (środek widełek).
- Masa podana przez autora
- 2 g
- Czas druku podany przez autora
- 18 min
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
This file is a more rigid servo arm for the Rancher. The Rancher itself is NOT part of this assembly!
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 294
- Wydruki
- 2
- Wyświetlenia
- 2546
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — NoDerivatives
This file is a more rigid servo arm for the Rancher. The Rancher itself is NOT part of this assembly! If you want to print the Rancher, you will need files from third party as well. Files can be found at 3dsets.com.
The Rancher has 4x4 wheel drive, is radio controlled, and all items except suspension, bearing, screws, tires and electronics are 3d printed. Took about 2 weeks of printing, and 12 hours of assembly. Files can be purchased at given URL, pictures and information provided under CC Attribution / no derivates.
Arm based on work by hugokernel, https://www.thingiverse.com/thing:28566, adapted to match my needs (changed thickness, changed dimensions of head).
Print instructions
Servo arm printed with 4 shells, 100% infill from Prusament PLA