Mr Lovens #1 Loser Award
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple #1 Loser Award based on the Mr. Loven's webcomic
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 204
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is a three piece award made based on the secret panel of this comic.
Intended to be printed by the Bambu family of printers, but any printer with a MMU or AMS will work.
Small instructions:
The objects seem like they don't have text, but they actually have some depth to paint the objects.
The trophy base has some text that says #1 LOSER. 
It's meant to be colored in with the external text down on it's face. 
There's some internal text thanking Mr. Lovenstein.
The hand has an imprint of the color and can be printed in white with the imprint painted Black. If you don't do this, the white will look dull. 
Print it color side down on a texture plate for better effect.
Glue Assembly Required. Enjoy.
2x-4x wall, 15% infill, gyroid. 0.20mm layer works, especially when running wood PLA. I use 0.12mm
PLA Wood, PLA Bronze, PLA Black and PLA White recommended.
Tested with Polymaker ASA
A 3MF of my test print is included.
Updated 1/29/25 - I've rectified the wrong model geometry for the mount