Print In Place Ultimate Fidget Cube
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Flattened version for easier printing!Higher Tolerance Version + Test ModelMidi sized version - 3/4 size = faster…
- Ocena
- 4,871 / 5
- Polubienia
- 1008
- Pobrania
- 7111
- Wydruki
- 73
- Wyświetlenia
- 17 242
- Oceny
- 62
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Puzzles & Brain-teasers
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
- Flattened version for easier printing!
- Higher Tolerance Version + Test Model
- Midi sized version - 3/4 size = faster printing, same amount of fun!
Notes:
I wasn't happy with how loose the original model was, so I pushed the tolerances a bit more for a tighter fit. The result is a much more solid feeling cube. HOWEVER for some it might just fuse at the joints so I have provided a Test Model which takes around 30 minutes to print.
Midi size uses higher tolerances so might be liable to fusing. If the top joints are good, the joints touching the bed probably will need careful persuasion to loosen up completely. Leave a note in the comments if this is an issue.
0.2 Layer height 15% infill
Post-Printing
Gently manipulate each joint to free them up - they should come free with minimal fusing.
Category: Puzzles