Teach your kids the analog clock! Edit: Added combined 12/24h clock
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An analog clock for teaching your kids. It is manual use only :)
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 219
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other 3D Objects for Learning
- Licencja
- Creative Commons — Attribution
I made this model to teach my kids the analog clock. It prints reasonably fast, and does not use too much filament.
The minute markers and the numbers can be colored with a filament change.
NB: This is only a learning tool. It is completely manual, and cant be made to work like a real clock.
You need to print one of each part (file), but two spacers, as one go between the great show and the little show, and one at the top, before the nut.
Dont tighten the nut, just leave it quite loose, so the arms of the clock can move easily.
PLA or PETG
You can print at 0.2mm layer height, but the threads are fine, and should be printed at 0.12mm. Variable layer height in the slicer can help here.
EDIT: I added a clock with 24h numbers, but I have not printed it. It should work fine.