Craftsman 3/8 Ratchet Gridfinity Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gridfinity Bin for the Craftsman 44811 3/8 ratchet.
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 115
- Wydruki
- 0
- Wyświetlenia
- 492
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
Gridfinity Bin for the Craftsman 44811 3/8 ratchet. Probably the most prolific ratchet of the last 50 years. Yes it has a low tooth count, yes it is based on older technology, yes the newer ones are not as good as the old Sears models. But they have been around forever and I have a bunch of them and needed holders. This model has a slight curve at the base of the handle to accommodate slightly different castings/finishings.
I painted the size with a sharpie. Simple, cheap, effective.
I got a nice quality print in PLA with:
.2 Layer
4 Walls
15% Infill