Modular Trophy System
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a modular trophy system to easily create different trophies. Great for any event where a trophy is desired.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 345
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This modular trophy system consists of three parts
- Trophy base
- Trophy name plate
- Trophies
The trophy base holds the trophy and the name plate. The name plate can easily be changed in Prusa Slicer to delete the words and create new ones. This works great with PrusaSlicer's automatic logo or sign detection to add a filament color change for the words. The base plate has a single 10mm (diameter) x 1.5mm (tall) “post” that can accept any trophy that has a hole 10.2mm in diameter and 2mm deep. The platform of the base (where the trophy sits) is 58mm x 70mm, and the post is in the center of the platform.
No supports are needed for printing the base, plate or trophy (even the chili pot). The trophy was modeled upside down, so that when it is imported into PrusaSlicer it is ready to print, no need to rotate the model.