Apple iBook G3 ("Clamshell") Top Case logo Insert
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement part for the top case of the old Apple iBook G3.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 288
- Wydruki
- 0
- Wyświetlenia
- 1973
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed this to replace the Apple case logo on the old iBook G3 laptops from 1999/2000(they fall off and get lost very easily after all these years).
It can be printed in resin or fdm.
I was going to print the final part in resin, but after seeing the nice frosted look I was getting with clear PETG on my test prints I decided to stick with that. It would also be a bit of a pain to match the laptop colour tone exactly. And the clear frosted look will work with any version of the G3 iBooks(blueberry in my case).
Printed in Eryone Clear PETG with 100% infill and a .07mm layer height on the MK3S+.