Inland spool drawer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Turn your empty Inland filament spools into small parts containers!!
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 41
- Wydruki
- 1
- Wyświetlenia
- 180
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
I have some empty Inland spools laying around and I thought I had seen someone make containers that used spool holders but I couldn't remember where. Since I like to design simple things I decided I'd just design my own to go with these particular spools.
You can put 4 on a spool. Just mirror two of them.
I print the pins with a brim as hinge pins. I leave the brim on them and glue them in place. The brim holds them while the glue dries. I guess you could glue the pins and the brim to the spool. Took me a while to get a decent handle without it sticking out too far. Alternately you can push on the short end by the hinge and it will swing out as well.
This is a good model to use up small pieces of filament.
I uploaded pics to a 3D printing group on Facebook and a couple people really liked it so I thought i'd just upload the files here.