Dicey Dice
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Some rather dicey experiments with dice. FreeCAD file included.
- Ocena
- 5 / 5
- Polubienia
- 2
- Pobrania
- 61
- Wydruki
- 1
- Wyświetlenia
- 239
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Share Alike
This project contains a few more or less weird dice:
- a normal one
- one with the holes (pips) going as deep as possible
- one with only “ones” on all sides
- one with only “sixes” on all sides
- one with the pips going (far) outside instead of inside
The dice are 12mm wide.
Those dice can be used for various games, tricks, or pranks.
Except for the last one all of them can be printed without support structures. I recommend 100% infill to make them evenly weighted.
The ones with deep holes look rather interesting with transparent filament.
Print the die with outwards pips standing on the "one" and the “six” pointing up, this minimizes necessary support structures. Enable full supports. Be careful when removing supports, the “pips” are very fragile.
The FreeCAD model is included, so you can modify the dice.