Decimator Micro USB Reinforcement Plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tired of your crew forcing the micro USB in upside down, destroying the connector? Not anymore.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 60
- Wydruki
- 0
- Wyświetlenia
- 244
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Public Domain
Decimator MD-LX with micro USB.
This strain relief plate locks the micro USB cable into the connector. The plate prevents hands from inserting it upside down repeatedly, destroying the male USB inside the decimator. Once installed, you'll never lose your sweet red cable again, as the USB cable will be completely locked in. There is plenty of clearance for the girthest sdi sleeves. This Thing is BEEFY. It has the most beef. Terry is not going to drop it and break it five minutes before doors. Never again, Terry! You can swing this thing above your head like a flail without worries.
Only one small screwdriver is required to install, and it uses the decimator's existing screws. ***This item installs on top of the deci's top plate.***
I have been using petg and pla with no issues. Feel free to smooth the edges out or modify it however you want. It's free until I get served papers.
I have seen similar items for sale, but I have a printer and I already pay for Vectorworks. So, yeah.