Adjustable picture frame with carboard and plexiglass
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An adjustable picture frame that holds the photo in between plexiglass and cardboard.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 233
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Share Alike
I saw the original infinitely adjustable picture frame and thought that I could make it work using some of the cardboard I had laying around. I modified the amount of space in the model so that it was wide enough to fit a piece of cardboard, a thin layer of plexiglass, and a sheet of high gloss paper. I also added some QoL adjustments to make it easier to print.
When customizing the side pieces, make it 0.1" less than the target for that side, i.e. 6.9" to make a 7" side.
Regardless of what material you are using, I recommend printing the side pieces with mouse ears or the side pieces will peel up.
I used the plexiglass sheets from:
https://www.amazon.com/dp/B099DBW1PG?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1