1 / 2
Dupont Connector Sleeves - 4 Pins, 6 Pins, and 10 Pins
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
shorter depth to allow for PCBs with side-mounted pins. Modified to allow sleeves to be side by side.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 60
- Wydruki
- 0
- Wyświetlenia
- 505
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (14)Powiązane
I found the original model and printed them to try with my Pimoroni Picade Max Aracde. When connecting them to a horizontal connector the sleeve would not allow the pins to fully connect. I also noticed that when connecting sleeves to groups of cables and connecting side by side they would not fit due to the ridge on the original model so I made the sides flush.
Also on the 4 and 6 pins models, I adjusted the inside dimensions for the connectors to fit more securely inside the sleeve.