1 / 1
ID spacer for ID Badge Holder by j.e.hahn — zdjęcie 1

ID spacer for ID Badge Holder by j.e.hahn

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Simple spacer for the ID badge holder created by j.e.hahn

Ocena
0 / 5
Polubienia
1
Pobrania
10
Wydruki
0
Wyświetlenia
85
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

I really liked the ID badge holder that j.e.hahn made, but a little afraid that my ID would fall off and not a big fan of the noise it was making.

So I did this really simple spacer to make everything tight. 

Fusion 360 file included if you want to make some adjustments for your own ID that might be thicker or thinner. Mine was 1mm thick, so I made the thickness (height) of the spacer 2mm.

Tagi