Corner punch for (DIY Foto/picture "wall-matrix")
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Corner hole punch layout tool for any size photo to be utilized in the wall-matrix
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 143
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
In order to utilize any size/shape of photo in the wall, I needed to be able to consistently punch the holes for the connectors. This small tool allows for easy and consistent layout.
This allows you to utilize any size of photo in the matrix. My main use case is 5x7 inches and a few 4x6 inch sets.
Push a nail or other sharp tool through the thicker side for alignment, through the photo, and out the other size. It works best if you punch through from the back, since you'll be pushing the connector rods up through in that same direction.
Original OnShape model link if modification is desired: https://cad.onshape.com/documents/15c07f5a27ea66770d062dd8/w/ae98a127d4ef71b9559ec0a1/e/0a50226f4d3d117a3fc5a371